3 Axles Lowbed Trailer
30-90 Tons capacities
CHASSIS AND STRUCTURE:
Lowbed rack is welded by submerged welding machine from 20 mm x 150 mm ST52.3
Quality steel bottom and top flat steel and 10 mm ST52.3 hub plate. It has I section and also
includes 4 pcs.
Rack is supported with 160 NPI axle beams that crosses rack.
It has been produced in welding constructions with gas metal arc welding as I crossing from
high resistant steel considering overloads proper to capacity and intended usage.
Platform size: 8000 - 10500 mm varies according to demand. Lowbed can be extendable.
Total Length: Variable
Total Width: 2550 mm - 3300 mm varies according to demand.
3 pcs Axles, each one is with 12-14-16 tons capacity according to the trailer drum or disc
brakes, hub centric, with 10 wheel nuts, and automatic slack adjuster.
Manufactured with air or hydraulic piston from NPU with 160
The WABCO or Haldex brand ABS or EBS brake system which is designed according to the
European Standards is used. It consists of automatic brake ratchets, brake valves and brake
bellows of 30.
It consists of automatic height adjusting system, Parabolic Z leaf springs, Suspension bellows,
shock absorbers restricting extensive shaft movements and vibrations.
Mechanical leaf spring suspension system.
24 V illumination systems in conformity with the international standards, lamp with 7
functions, and electric socket with 7 pins are used. There are traffic warning panels on the
Consists of double cycle telescopic legs each of which has a capacity of 24 tons.
King pin compliant with SEA/DIN norms and manufactured from steel (42 Cr Mo 4) which is
highly resistant to being cut, stretched and broken off is of flange type and can be
disassembled and assembled back.
TIRES AND WHEEL RIMS:
12+1 tires are used with different dimensions. Dimension that we use are; 235/70 R 17.5
245/70 R 17.5
295/60 R 22.5
12 R 22.5
315/80 R 22.5
Water Retainer Mat, Spare tyre carrier, Wheel leaning mounting, Fire extinguisher preserving
Lowbed platform can be pool type
BPW, SAF, Gigant Axle drum or disc axle can be preffered.
Chassis and side walls group manufactured from imported metal sheet (Hardox or Domex).
Tire mark according to request.
The surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it
is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against
chemical effectiveness. As desired, colours can be chosen from the RAL codes.