They can be adhered to Emülzer C or Emilkote primed surfaces by torch application. First coat membranes must be adhered solely at overlaps, and second coat membranes must be adhered to the first coat membrane as well as the overlaps. Note that the surfaces are not primed in packaging applications.
• At seams they should overlap 10 cm horizontally, and 15 cm vertically. For ease of use, overlap points are marked on Emülzer membranes.
• Bituminous membranes must be applied at least in two coats and zigzagging (must be 50 cm horizontally and 5 meters vertically).
EM 200C - EM 300C Polimer Bituminous Membranes
2-3 mm thick bituminous membranes reinforced with fiber glass. Both
sides are covered with PE film.
They are used as the first coat in shingle, slated or aluminum foiled
EM 300P - EM 400P Polimer Bituminous Membranes
3-4 mm thick bituminous membranes reinforced with polyester felt. Both sides are covered with PE film.
Used in 2 coats in foundation packaging insulation, and as the first coat in shingle, slated or aluminum foiled membrane applications. Advantages
Thanks to polyester felt reinforcement, they offer high tensile strength as well as extension strength.
EM 300 PAR Slate Coated Bituminous Membranes
3mm kalınlığında kırmızı veya yeşil arduaz taşı kaplı, polyester keçe taşıyıcılı bitümlü membranlardır Kullanım Alanları
Üzerinde koruma kaplaması yapılmayacak uygulamalarda son kat
membran olarak kullanılırlar
Hafif olduğu için çatıya fazla yük getirmez. Doğal taş kaplaması çok dekoratiftir.
EM 300 PAL Alüminyum Folyo Kapli Polimer Bitümlü Membranlar Tanımı
3mm thick, red or green slate stone coated membranes reinforced with polyester felt.
Used as the top coat membrane on metal surfaces with no UV exposure and foot traffic.
As a light material, there is no load problem for the roof. Very decorative with its natural stone coating.